Where are NorthStar Generators Made?

NorthStar generators are known for their long lifetime and outstanding performance. However, with most American companies outsourcing production from Asian factories, the location of manufacture may be unclear.  This article explains where are NorthStar generators made. their features, and how they compare with other brands.

NorthStar generators are designed, tested, and build in Minnesota by Northern Tool + equipment Inc. Although they use Honda GX series engines, they’re assembled and produced in America. Northern tool + equipment is an American company dealing in outdoor power products. They also design and test power horse generators. All North Star Generators are EPA and CARB compliant. They can be used in all states.

Why NorthStar Generators?

Where are NorthStar Generators Made?NorthStar generators have brushless copper heads. This gives you longer runtimes without engine breakdowns due to overheating.

Best Northstar Generators

1. NorthStar 15000 Watts

Engine Design

The NorthStar 15000 is powered by a 688cc Honda GX690 Engine. It has a horsepower of 22.2 hp and it’s a 4-stroke Engine. It operates at a noise rating of 79 dB; therefore noisy. The engine uses overhead valves with dual ball bearings to increase its lifetime.

When the oil is below a critical level, the low oil shutdown feature turns the generator off. This increases the lifetime of the crankshaft, pistons, and valves.

To reduce overheating, the engine has 100% copper-wound heads. It’s air-cooled ensuring long runtimes without overheating. The engine is fitted with a muffler that absorbs and deflects vibration from the engine. This increases their lifetime.

User Interface and Control

The NorthStar uses variable timing digital CDI for easy startup. This requires a recoil battery backup which is bought separately. It’s powered on by key ignition. Below the engine ignition, there’s a display showing the runtime of the generator. A fuel indicator on top of the ignition alerts you when the fuel is low.

To monitor the voltage output, there’s a voltmeter that displays voltage output in real-time. You can plug your home or RV into the generator through 11 outlets on the smart panel. There are 8 120V, 20 A outlets. For more applications, there are 120V/240V receptacles with one supplying 30A and another 60A. The last receptacle outputs 120 Volts at a current of 30 Amperes (A).

All the outlets supply alternating current (A/C).

Fuel Consumption

The NorthStar packs an 11-gallon tank. This can run for 16 hours at rated wattage and 12 hours at peak wattage. It runs on Gasoline.

Power Output and Applications

It’s rated at 13500 Watts starting wattage and 15000 Watts peak wattage. This can power large industrial, commercial, and residential applications. Its CARB (California Air Board) certified and can therefore be used in all 50 states.

Voltage Regulation

Apart from keeping the engine cool, the 100% copper heads keep the harmonic distortion below 5%. This ensures a clean, stable current for your appliances.

It offers dual voltage of 120 and 240 Volts.

Portability

The NorthStar can be fitted with a wheel kit and handles. Although it weighs 367 pounds, it can be pulled around with the wheel kit installed. To make it steady while running, it’s fitted with vibration isolation mounts with interlocking anti-rip brackets. It’s framed using a full roll cage on anti- trip mounts to prevent sliding.

2. North Star 13000 Watts Generator

Engine Design

The NorthStar is powered by a Honda GX630, 4-stroke, 688cc Engine. The engine uses Over Head Valve technology to reduce wear and tear in engine components. It has a V-mount vibration isolation system that absorbs and deflects vibrations from the engine. This increases the engine components’ lifetime.

To give you longer runtimes, it uses 100% copper heads to reduce the risk of overheating. It’s air-cooled therefore running for longer hours even on peak wattage.

The low oil shutdown feature turns the engine off when there’s insufficient oil. This reduces the cost of maintenance by minimizing corrosion of engine components.

It operates at a noise rating of 79dB; noisy from a close range. It however has a muffler that deflects some of the noise.

Fuel Consumption

The NorthStar 13000 has a capacity of 11 gallons. This gives you a runtime of 20 hours when operating at the rated wattage.

User interface and controls

Like the NorthStar 15000, it has receptacles for connecting your home or RV. There are 8, 120 Volts and 20 Ampere outlets for normal appliances. To support devices with a higher current rating, it supports dual voltage with one outlet delivering 50A and the other 30A. The remaining outlet supplies 120Volts at 30A of current.

To monitor the status of your generator, there is a voltmeter, and runtime display. Above the ignition is the fuel indicator that alerts you when fuel is low.

To power it on, it uses a variable timing digital CDI key ignition system. This is enabled by electric start. However, a recoil battery is required for the electric start but sold separately.

Power Output and application

The NorthStar 13000 has a rated wattage of 10500 Watts and surge wattage of 13000 Watts. It can power industrial, commercial, and large-scale residential applications.

Its CARB certified and can be operated in California and other states.

Portability

It’s enclosed by a full roll cage with anti-slide mounts. This keeps it steady on whatever surface it’s running on. A wheel kit and foldable handles can be fitted onto the frame but are sold separately.

Voltage Output and Regulation

The engine’s 100 % copper-wound heads have a harmonic distortion below 5%. This ensures a clean stable current for your voltage-sensitive appliances.

It offers a dual voltage of 120 or 240 volts.

3. NorthStar 5500 Watts

Engine Design

The NorthStar 5500 is propelled by a 270cc Honda GX270 Engine.

The 4 stroke engine uses overhead valves to reduce wear and tear of the engine pistons, crankshaft, and valves. When the Oil levels are low, the engine shuts off automatically to prevent wear and tear. It has a horsepower of 8.5hp which delivers 6kW of power at 3600 rotations per minute (rpm).

The copper-wound heads and the engine air cooling system keep overheating in check. The North Star can therefore run for long hours without breaking down.

To protect internal components from excess vibration, it has a V-mount vibration isolation system.

At the bottom of the roll cage frame is a solid base to prevent grass and debris from getting into the alternator and engine.

User Interface and Control

To power it on, there’s an on and off switch on the smart panel enabled by Digital CDI ignition. It however does not need a recoil battery.

It has 10 receptacles to plug your appliances or RV into. There are 8 outlets for 120V/20A connections and one for 120/240V and 30A connections. These 9 outlets supply alternating current (A/C).

To support more applications, there’s one 12Volt Direct Current (DC) outlet.

To monitor the voltage output of your NorthStar, there is a voltmeter on the control panel.

Fuel Consumption

The NorthStar has a tank capacity of 6.5 gallons. This gives you a runtime of 10 hours on peak wattage and 14 hours on rated wattage.

 Power output and applications

The NorthStar 5500 has a starting wattage of 4500 Watts and a Peak wattage of 5500 Watts. It’s suitable for home power backup, camping, and lightweight outdoor events.

It’s CARB compliant and can be used in all 50 states.

Voltage Regulation

The copper-wound head has a harmonic distortion rate of below 5%. This ensures clean, stable power for your appliances.

The NorthStar 5500 offers a dual voltage of 120 or 240 Volts.

Portability

It’s enclosed in a roll cage with a solid base. To make it portable, an optional handle and wheel kit is provided separately. It’s a lightweight generator weighing 192 pounds and can be easily pulled or pushed up around.

How do NorthStar Generators compare against other brands?

NorthStar 15000W VS Pulsar 15000W

Engine Design

The NorthStar 15000 is powered by a 688cc Honda GX690 Engine with a horsepower of 22.2 hp. The Pulsar 15000 is powered by a 713cc, 25 HP 4-stroke V-twin engine. The NorthStar operates at a noise rating of 79 dB therefore noisy. The Pulsar has a noise rating of 77dB; they’re both noisy.

Both engines use overhead valves with dual ball bearings to increase their lifetime. Both Generators have the low oil shutdown feature. This turns your generator off when the oil is insufficient increasing the lifetime of the crankshaft, pistons, and valves.

To reduce overheating, the North Star’s engine has 100% copper-wound heads. The Pulsar relies on air-cooling to guarantee long runtimes without engine breakdowns.

User Interface and Control

For quick startup, the NorthStar uses a key ignition system with variable timing digital CDI .This requires a recoil battery backup. It’s however not shipped with the unit but is available on amazon.

The Pulsar 15000 uses a push start button powered by electric start. For recoil backup, it uses a dry battery provided within the unit. The North Star has a fuel indicator, runtime display, and a voltmeter for status monitoring. The Pulsar has a display on the smart panel showing voltage, frequency, and runtime. In addition, there is an oil indicator and fuel gauge for easy management of the generator.

The NorthStar has 11 outlets on the control panel to plug in your home or appliance into.

There are 8 120V, 20 A outlets. For higher voltage and current, there are 120V/240V receptacles with one supplying 30A and another 60A. The last receptacle outputs 120 Volts at a current of 30 Amperes (A). The pulsar has 7 outlets.2 120V/20A duplexes, 1 120V 30A receptacle, 2 dual voltage (120/240V) outlets discharging 30A and 50A.The remaining receptacle discharges 120 Volts at a current of 30A.

Both generators supply alternating current (A/C) and lack DC (Direct Current) outlets.

Fuel Consumption

The NorthStar has a capacity of 11 gallons. It can run for 16 hours at rated wattage and 12 hours at peak wattage. The Pulsar has a tank of 10.6 gallons. This gives you a runtime of 10 hours when operating at the rated wattage.

They’re both powered by Gasoline.

Power Output and Applications

The NorthStar delivers 13500 Watts as starting wattage and 15000 Watts as peak wattage. The Pulsar delivers a starting wattage of 12000W and a peak wattage of 15000W.

Both generators can power large industrial, commercial, and residential applications. Both generators are CARB (California Air Board) and EPA certified they can be used in all 50 states.

Voltage Regulation

The North star relies on its 100% copper heads to keep the harmonic distortion below 5%.this ensures a clean, stable current for your appliances. The Pulsar uses automatic voltage regulation to stabilize the output current.

Both Generators give you dual voltage of 120 and 240 Volts.

Portability

The NorthStar is relatively heavy weighing 357 pounds. Although not provided, it can be fitted with a wheel kit and handles to make it portable.

It’s installed with vibration isolation mounts with interlocking anti-rip brackets. This ensures a firm grip on the surface it’s on. It’s framed by a full roll cage on anti- trip mounts to prevent sliding.

The Pulsar weighs 353 pounds. It’s fitted with a wheel kit and foldable lock handles for maneuver.

NorthStar 13000W vs Power Horse 13000W

Engine Design

The NorthStar is powered by a 4-stroke 688cc Honda GX630 Engine and the Power horse a 622cc Power horse engine. Both engines use Over Head Valve technology to reduce wear and tear in engine components.

Both the NorthStar and Power horse use 100% copper heads to minimize overheating. The NorthStar has additional air-cooling, therefore, running for longer hours even on peak wattage.

Both Generators have the low oil shutdown feature to reduce maintenance costs. The Pulsar operates at a noise rating of 76.8dB and the NorthStar operates at 79dB; making it quieter. They are both fitted with mufflers to reduce the noise.

Fuel Consumption

The NorthStar has a capacity of 11 gallons. This gives you a runtime of 10 hours at rated wattage. The Pulsar has a 12.6 Gallon tank. This gives you a runtime of 15 hours at rated wattage.

They’re both Gasoline powered.

User interface and controls

The NorthStar 15000 has receptacles for connecting your home or RV. There are 8 120 Volts and 20 Ampere outlets. To support higher current needs, it outputs a dual voltage with one outlet delivering 50A and the other 30A. The remaining outlet supplies 120Volts at 30A of current.

The pulsar has 4 120V 20A outlets, 1 120V 30A outlet, 1 120/240V 30A receptacle, 1 120V/240V 42A and one 12V Dc outlet.

To monitor the status of your generator, there is a voltmeter, and runtime display and fuel indicator. The Pulsar 13000 however has a simpler display showing only the voltage.

The NorthStar uses a variable timing digital CDI key ignition system for startup. The Pulsar uses electric start and a push button. In both cases, a recoil battery is required for the electric start but separately.

Power Output and application

The NorthStar 13000 has a rated wattage of 10500 Watts and a surge rating of 13000 Watts. Its CARB certified and can be operated in California and other states. The Pulsar is rated at 10000 Watts and has a surge wattage of 13000 Watts.

Both generators have the same power output. They can power industrial, commercial, and large-scale residential applications.

As in the comparisons above, North Star Generator have similar features to other brands. However, their engine design and lifetime make them a better choice.

Conclusion

NorthStar generators are assembled in Minnesota, the USA by Northern Tool + Equipment.

Because of their brushless 100 % copper heads, they have a longer lifetime than other brands.

Combined with the high power output, they’re suited for heavy-duty applications with a high runtime.

Faqs About Northstar Generators

Are North Star Generators Made in the USA?

Where are NorthStar Generators Made?Yes. NorthStar Generators are designed, built, and tested in the USA by Northern Tool + Equipment.

Who Manufactures North Star?

Northern tool and equipment. They design, assemble and test the NorthStar generators in Minnesota.

Are Generac Generators Made in the USA?

Yes. Generac generators are designed, assembled, and tested by Generac Power Systems in Wisconsin, USA. You can read more on where Generac generators are made?

What Generators are made in Japan?

The following generator brands are designed and built in Japan.

  • Honda
  • Yamaha
  • Makita
  • Yanmah
  • Mitsubishi
  • Toshiba
  • Nishi Nippon
  • Kubota

Is NorthStar a good generator?

Yes. NorthStar Generators have a long lifetime, are fuel-economic, and serve a wide range of applications.

Are NorthStar generators brushless?

Yes. All NorthStar generators use 1005 copper wound brushless heads. They can withstand long runtimes with little or no overheating.

What Engine do NorthStar generators use?

North Star Generators use Honda GX series engines.

Are NorthStar Generators environmental friendly?

Yes. They are EPA (Environmental protection Agency) and CARB (California Air Board) certified. They can be operated in all 50 states.

Their Noise rating is less than 79dB making them safe for the environment and the user.

About Steve Stuart

Steve Stuart is an electrical engineer who developed interest on generators during his school years. After school, he became a generator enthusiast. This is after encountering power supply problems at the area of residence where he lived. Power would be on and off and so food would go bad and the room heater would go off especially during winter. After trying the different generator brands for several years, Steve now provides information on the available brands and products in the market today. Based on his experience, he gives the do’s and the don’ts when it comes to generator use.

Leave a Comment